Cleaning and maintenance instructions

To ensure the long-term good quality of the frames manufactured and installed by the manufacturer, you should regularly (at least once every six months) maintain the following parts:
Mechanisms - hinges: All moving parts of the frame and the hinges must be lubricated every six (6) months with silicone spray or grease.
The rubbers: They must be sprayed with the same silicone spray or grease, and wiped with a clean cloth.
The profiles: They must be cleaned with a mild detergent and lukewarm - cold water and a soft cloth (not wires and hard sponges) to remove dust particles and other things, especially in the corners.
ATTENTION!!! The frame must not be cleaned with mineral products, oil, common grease, gasoline, solvents. There is a risk of causing damage to the profiles and the rubber. It is recommended to use mild liquid detergents (e.g. for dishes). For special types of dirt (marks from pencils, asphalt, watercolors, pens, fuel oil, PVC and common glues, nitro-based lacquer, petroleum-based lacquer, wax paints) consult our company so as not to degrade the durability and appearance of the frames.
ATTENTION!!! It is not allowed to rub the profiles with sandpaper, wires, metal brushes, metal spatulas or blades. There is a risk of causing irreparable damage to the materials. For the same reason, you should not rub the above materials and the glass because they scratch and degrade their optical performance and aesthetics.
ATTENTION!!! It is not advisable to wash the profiles with a pressure washer or a watering hose. There is a risk of overflowing of the drain pans that the profiles carry, while it is also possible that permanent moisture will be created at the base of the glass, which will affect its sealing and cause moisture to penetrate the gap of the insulating glass.